Products
Tel： +86-531-58595086
Fax：+86-531-86113759
Mail： admin@superhousebj.com
ZXQ-5 Touch Screen Automatic Metallographic Specimen Mountin
ZXQ-5 Touch Screen Automatic Metallographic Specimen Mounting Press
1.Application:
ZXQ-5 Touch Screen Automatic Metallographic Specimen Mounting Press is a kind of full
automatic mounting press, equipped with in-out water cooling system.
It is suitable for the heat mounting (thermohardening & thermoplastic) for all kinds of materials.
After the parameters such as heating temperature, heat preserving time and applied force etc.
are set up, put the specimen and mounting material into the machine, close the cover and press
the start button,then the machine will finish the job automatically.
It is not necessary for the operator to be on duty.
According to different requirements of the material,there are four kinds of moulds that can be
chosen to meet the demands at will.
Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
2.Technical Parameters:
| Model | ZXQ-5 |
| Mould Diameter | Φ25mm, Φ30mm, Φ40mm, Φ50mm |
| Power Supply | 220V, 50Hz |
| Maximum Consumption | 1800 W |
| Pressure | 0~2 MPa |
| Temperature Setting Range | 0~180°C |
| Holding Time | 0~99 minutes And 99 seconds |
| Outline Dimension | 625*505*500mm |
| Weight | 110 KG |
| Cooling Method | Water Cooling |